maallyn/modular-radar
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Add build instructions

Browse Source
This commit is contained in:
Mark Allyn
2026-06-17 10:05:03 -07:00
parent b554dbd655
commit e3b09170a4
2 changed files with 22 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

21
03_setup_and_radar_selection.md
View File

@@ -14,7 +14,22 @@ Note: if the operator invokes no parameters, then all the radars are to be made
When the application is started, it will be in a state where no radar is in use. The visitor
will use the selector to select a radar to operate.
The setup_and_radar_selection shall be within the main.cpp file. It shall run in thread 1
as it accesses the shaders
The following is suggested.
1. Read the parameters; check to radar management stucture to make sure
that a selected radar is operatable. If it is, then set available in the
radar management structure.
2. Initialize opengl.
3. Put up introduction text on left panel.
4. Sit in select loop. Wait for operator to make a selection. If there is only
one radar available, wait 5 seconds and then go to that radar.
5. Run in a loop where every 30th of a second, update the selected radar.
======================================================================